 |
YANGZHOU LASTE MECHANICAL ENGINEERING CO., LTD. 扬 州 乐 特 机 械 有 限 公 司 |
 |
::Home:: ::Universal Joint Shaft:: ::Catalogue:: ::How to Select:: :Contact us::
 |
Type | JA25 | JA50 | JA70 |
| working weight (T) | 25 | 25/50 | 70 | |
| air pressure (Mpa) | 32 | 32 | 32 | |
| Lowest high (mm) | 360 | 220 | ||
| Hoist high (mm) | 250 | 225/117 | ||
| Lengthen staff (mm) | 40-75 | 40-75 | ||
| Weight (kg) | 62 | 79 | ||
|
SA38L Type, SA3801 Type
|
SA428 Type, SA518 Type
|
SA450 Type
|
|
Model |
air pressure (Mpa) |
Max Torque N.m |
Max Speed |
Size (mm) |
Crock diameter (mm) |
Machine Length (mm) |
Net Weight (kg) |
| SA38L | 0.5-0.7 | 1950 | 4800 | 25.4 | 13 | 520 | 11 |
| SA428 | 0.5-0.7 | 2700 | 4300 | 25.4 | 13 | 580 | 15.5 |
| SA518 | 0.5-0.7 | 2700 | 4200 | 25.4 | 13 | 576 | 15.5 |
| SA450 | 0.5-0.7 | 1950 | 4600 | 25.4 | 13 | 520 | 11 |
| SA3801 | 0.5-0.7 | 1950 | 4600 | 25.4 | 13 | 520 | 11 |
>>> Energy-saving Pneumatic impact wrench
SA20,SA30,SA42,SA56 |
 SA72 |
|
Model |
air pressure (Mpa) |
Torque N.m |
Max Speed |
Air consume (L/S) |
End Size (mm) |
Crock diameter (mm) |
Working size |
Machine Length (mm) |
Net Weight (kg) |
| SA20 | 0.63 | 660 | 4000 | 13 | 19.5 | 10 | M12-M20 | 345 | 4.8 |
| SA30 | 0.63 | 1260 | 3500 | 15 | 25.4 | 10 | M16-M30 | 385 | 6.9 |
| SA42 | 0.63 | 2500 | 3000 | 17 | 31.75 | 13 | M20-M42 | 455 | 12 |
| SA56 | 0.63 | 6300 | 2500 | 60 | 31.75 | 13 | M42-M60 | 17 | |
| SA72 | 0.63 | 18500 | 1800 | 75 | 45 | 16 | M64-M75 | 34 |
>>> Pneumatic screw cap remove-install machine
 |
Type |
Max Torque N.m |
air pressure (Mpa) | Max Speed (rpm) |
Air consume (L/S) |
End Size (mm) |
Crock diameter (mm) |
Machine Length (mm) |
Net Weight (kg) |
| LB1100 | 1200 | 0.63 | 4300 | 3.5 | 25.4 | 10 | 1200-2200 | 32 |
>>> Pneumatic riveting hammer
 |
Type | Riveting diameter (mm) | air pressure (Mpa) | Impact energy (J) | Impact frequency (HZ) |
Air consume (L/S) | Crock diameter (mm) | Machine length (mm) | Net weight (kg) |
| LR16 | 16 | 0.45-0.63 | ≥21 | ≥21 | ≤15 | 27 | 416 | 7.5 | |
| LR22 | 22 | 0.45-0.63 | ≥31 | ≥18 | ≤15 | 27 | 507 | 9.5 |
>>> Sleeve and Speediness tie-in
|
Sleeve |
speediness tie-in |
::Home:: ::Universal Joint Shaft:: ::Catalogue:: ::How to Select:: :Contact us::